WIRELAND — Signal Chain

This page is the complete routing map of the Wireland studio. Every MIDI path, every audio channel, every CV cable, every video signal — documented here so we don't have to remember it.

This is a living document. The chain changes as gear is added, swapped, and reconfigured. What you see below is the current state of the system.

Master Clock Distribution

The Sim 'N Tonic Nome 2 is the master clock for the entire studio. Everything syncs to it.

Nome 2 (5-pin Output 1) → Squarp Hapax MIDI Input A
Hapax MIDI Output C → Kenton Thru 5 → Oxi One MK1 / Torso T1 / Metropolix Solo / Hermod+

Audio Signal Flow

Audio flows from instruments through four sub-mixers into the main Tascam Model 12. Every instrument can be used simultaneously.

Tascam Model 12 (Main Interface)

Ch	Source
CH 1/2	Zoom LiveTrak L6 (stereo L/R)
CH 3/4	Bastl Bestie mix out (stereo breakout cable)
CH 5/6	Plinky Plus main L/R output
CH 7/8	Zoom LiveTrak L8 main L/R output
CH 9/10	Mac Studio audio out (NOT patched — allows individual stream control)

Model 12 Main L/R → Yamaha HS Studio Monitors
Model 12 USB → Mac Studio
Model 12 Sub Outputs → MIDIVERSE utility mixer CH 1–2 (enables routing to Eurorack or samplers)

Sub-Mixer 1: Zoom LiveTrak L6

Zoom LiveTrak L6 → Model 12 CH 1/2

Ch	Source
CH 1	Soma Pulsar 23 main audio out
CH 2	Koma Elektronik Field Kit FX master output
CH 3	Vacant
CH 4	Make Noise Strega headphone out (stereo breakout)
CH 5	Beetlecrab Tempera main L/R output
CH 6	Manifold Research Center Antelope main L/R output

Sub-Mixer 2: Bastl Bestie

Bastl Bestie → Model 12 CH 3/4

Ch	Source
CH 1	After Later Audio Mingles main L/R output
CH 2	Vacant
CH 3	Distortion circuit (always vacant — add distortion through any other channel)
CH 4	Solar 42F headphone output
CH 5	Befaco Oneiroi main L/R output

Sub-Mixer 3: Zoom LiveTrak L8

Zoom LiveTrak L8 → Model 12 CH 7/8

Ch	Source
CH 1/2	Vacant (stereo pair)
CH 3/4	Soma Laboratories Flux main L/R output
CH 5/6	Solar 42F main L/R wet outputs
CH 7	Split Mix 4 (passive mixer) main output
CH 8	Behringer Micro Mix MX400 main output

Split Mix 4 → L8 Channel 7

Artcessories Split Mix 4

Ch	Source
CH 1/2	Folktek Mescaline main L/R audio output (stereo breakout cable)
CH 3	Koma Elektronik Field Kit (not FX) master output
CH 4	Empty

Behringer Micro Mix MX400 → L8 Channel 8

Behringer Micro Mix MX400

Input	Source
Input 1	Something Modular 4-channel Eurorack mixer main mix out
Input 2/3	Herbs and Stones Moos channel A and channel B
Input 4	Moog Sub 37 main output

MIDI

The Squarp Hapax is the primary MIDI sequencer. All MIDI-sequenced devices have dedicated Hapax channels/tracks matching their MIDI channel numbers.

Hapax Track/Channel Assignments

Track	Channel	Destination
Hardware Instruments
Track 1	CH 1	Moog Subsequent 37 (instrument definition configured)
Track 2	CH 2	Beetlecrab Tempera (instrument definition configured)
Track 3	CH 3	Plinky Plus MIDI (instrument definition configured)
Track 9	CH 9	Soma Pulsar 23 — Bass Synth
Track 10	CH 10	Soma Pulsar 23 — Drums
Mac Studio Software (via USB)
Track 4	CH 4	MS1 (Mac Studio 1) (instrument definition configured)
Track 5	CH 5	MS2 (instrument definition configured)
Track 6	CH 6	MS3 (instrument definition configured)
Track 7	CH 7	MS4 (instrument definition configured)
Track 8	CH 8	MS5 (instrument definition configured)
Expert Sleepers FH-2 MIDI-to-CV
Track 11	CH 11	FH-2 + FHX-8CV outputs 17–24 (0–10V) — Landscape Noon, Pulsar 23, other 0–10V modules (instrument definition configured)
Track 12	CH 12	FH-2 outputs 9–16 (0–5V) (instrument definition configured)
—	—	FH-2 outputs 1–8: Dedicated to Euclidean generators and onboard FH-2 LFOs
Additional Instrument Definitions
Track 13	CH 13	Expert Sleepers FH-2 (instrument definition configured)
Track 14	CH 14	Squarp Hermod+ (instrument definition configured)
Track 15	CH 15	Torso T1 (instrument definition configured)
Vacant
Track 16	—	Vacant (labeled “B4”)

Hapax MIDI Ports

Port	Connection
Inputs
Input 1	Clock from Sim 'N Tonic Nome 2 master clock (5-pin output 1)
Input 2	Torso T1 MIDI output (TRS) — enables generative sampling for anything on Hapax
Outputs
Output A	Beetlecrab Tempera
Output B	Bomebox 5-pin input
Output C	Kenton Thru 5 (distributes master clock)
Output D (TRS)	Plinky Plus

Bomebox MIDI Routing

Bomebox

Port	Connection
5-pin In	From Hapax MIDI Output B
5-pin Out	U4 MIDI → Moog Sub 37 and Pulsar 23
USB Host	Powered hub with Expert Sleepers FH-2
Network	Bidirectional with Mac Studio (allows Mac to send/receive MIDI to 5-pin or USB host devices)

FH-2 receives MIDI from both Squarp Hapax and Mac Studio (via Bomebox network MIDI).

Control Voltage

CV sequencing is handled by the Oxi Instruments One MK1 — 8 pairs of CV/Gate outputs, no MIDI use. Controllable from Mac Studio.

Oxi One MK1 — Track Assignments

Track	Destination
Track 1	Folktek Mescaline
Track 2	Make Noise Strega
Track 3	Befaco Oneiroi
Track 4	Plinky V3
Track 5	Hex Inverter Mindphaser
Track 6	Solar 42F VCOs
Track 7	Drums (Endorphin.es Black Noir / Hex Inverter Mutant Machine / MRC Antelope)
Track 8	Drums (same destinations as Track 7)

Philosophy: MIDI devices use Squarp Hapax. CV devices use Oxi One MK1.

Video Signal Flow

All video sources ultimately reach VDMX6 or TouchDesigner on the Mac Studio via USB stream from the Roland V-02HD MK2 or NDI over the network.

Analog Video Chain

Analog Signal Flow

All composite or YPbPr analog signals → LZX TBC2 Encoder A or B → Syntonie Sortie decoder → Sortie A → LZX Videomancer analog input

Video Outputs

Source	Destination
Eurorack video main out	LZX Videomancer HDMI out
Videomancer HDMI	Roland V-02HD MK2 Input A
Hypno 2 (main system) HDMI	Roland V-02HD MK2 Input B
Roland V-02HD MK2 USB	Mac Studio (VDMX6 / TouchDesigner)

Roland mixer allows combining analog eurorack output with Hypno 2 HDMI before reaching the computer.

NDI Sources (Network)

NDI Video Sources

Source	Notes
Sleepy Circuits Hypno 2	Controlled by Mezz — NDI over network
Sleepy Circuits Hypno MK1	NDI over network

All video sources accessible in VDMX6 via NDI or USB stream from Roland V-02HD MK2.

MIDI

Video MIDI control runs through the U6 MIDI Pro interface, with the Light Reft Monolit as the primary controller.

Light Reft Monolit

Bank	Assignment
Bank A	LZX Industries TBC2 (faders, saturation, color)
Banks B–H	Available for future assignments

U6 MIDI Pro

Port	Connection
MIDI In 1	TRS output from Light Reft Monolit
Output 1	LZX Videomancer
Output 2	LZX Industries TBC2
Output 3	Sleepy Circuits Hypno 2 (main system) via MIO XC cable to USB port

TBC2: Fully configured. Videomancer: Not yet fully configured. Hypno 2: Ready for setup but not complete.

Mezz Controller

Controls the second Sleepy Circuits Hypno 2 unit.

Control Voltage

The Squarp Hermod+ is the brain of the video eurorack chain. All outputs configured to 0–1V (LZX standard) for sequencing video modulation.

Hermod+ → Video CV

Hermod+ (native 0–1V, 8 outputs) → TBC2, Sortie, and all eurorack video parameters

Integration Notes

System Notes

Topic	Detail
Sequencing Split	MIDI devices use Squarp Hapax; CV devices use Oxi One MK1
Computer Audio	Mac Studio routed to Model 12 CH 9/10 but NOT patched — allows individual stream control
Resampling Path	Model 12 sub outputs → MIDIVERSE utility mixer CH 1–2 enables routing any signal to Eurorack or samplers
Bomebox as Hub	Enables network MIDI from Mac Studio to hardware devices via 5-pin or USB host
FH-2 Sources	Receives MIDI from both Hapax and Mac Studio (via Bomebox network MIDI)
Video Status	TBC2 fully configured; Videomancer and Hypno 2 main system ready but incomplete
Vacant Channels	Multiple vacant inputs on sub-mixers and Hapax tracks (B, B2, B3, B4) available for expansion

Last updated: April 2026